Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Union City
If your chimney is pulling in water, drafting poorly, or letting a neighbor’s smoke smell drift into your living room, we can help. Union City’s attached townhomes and tight subdivision lots mean chimney problems here rarely stay contained to one unit, and we know how to trace them. Valor Chimney Cleaning handles diagnosis through repair on one ticket: sweeping, inspection, and chimney repair, so you’re not juggling three contractors for a single stack. Our technicians have up to 9 years of experience, and we work with professional-grade materials the trade actually relies on. Call (888) 268-0915 for a free estimate.

Why Union City Homeowners Call Valor Chimney Cleaning for Chimney Repair
Union City sits just south of Atlanta off I-85 in a heavily wooded, post-1990s suburban stretch. Most homes here were built with factory-built or masonry fireplaces that see light, occasional use. That changes the kind of chimney work the area actually needs: less heavy winter burning, more creosote buildup, animal nests, and storm debris on chimneys that were never really designed for frequent fires.
We approach every job diagnostically. A chimney repair call in Union City often starts with a camera inspection and a photo report you can see for yourself, because the honest answer sometimes is that the work can safely wait. When repair is the right call, we handle it in house and stand behind it.
We’re licensed and insured, we work around shared chases and adjacent flues common in Union City’s 1990s-2000s subdivisions and townhomes, and we schedule repairs Sunday through Friday. Whether your issue is cracked masonry, a failed crown, or a liner that no longer meets code, our chimney repair team can walk you through what we found and what it takes to fix it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Union City
Chimney Flashing Repair in Union City matters most on low-pitch townhome roofs where pine straw, leaves, and storm debris work the metal loose season after season. Flashing is the sheet metal seal where the chimney meets the roof; once it pulls free, water has a direct path into the chase. On an attached home that path can run sideways into a neighbor’s flue. A typical flashing repair in Union City runs $250-$550 depending on roof pitch and how much of the seal has to be rebuilt, with the written estimate setting the final price.
What We Look For at the Roof Line
Lifted step flashing, failed sealant, and water stains on the sheathing are the first things we check. Storm debris packed against the base of the chimney is a common culprit here, and it’s often masking damage that’s already started.
Repairing Around an Attached Roof
On a shared roofline, we trace the leak path across both sides before quoting the repair. That way you’re not paying to fix the wrong seam twice.
Chimney Crown Repair in Union City
Chimney Crown Repair in Union City is where a lot of hidden water damage starts. The crown is the concrete cap on top of the stack, and on a shared chase a crack in one unit’s crown lets water track down shared masonry into an adjacent damper or liner. That’s how a draft problem shows up two doors down from the actual leak. A typical crown repair in Union City runs $350-$800 for resurfacing or a partial rebuild, and a full crown replacement runs $600-$1,200. The written estimate sets the final price.
Sealing a Cracked Crown
We use a flexible sealing coat on hairline cracks and rebuild the crown where the concrete has broken apart. A crown that sheds water properly protects everything beneath it.
When the Crown Is Past Patching
Spalling, crumbling, and separation from the flue mean the crown needs to come off and be poured again. That’s a repair, not a rebuild, unless the masonry below is also failing.

Trusted Brands We Service in Union City
We install and work with professional-grade products from the brands chimney specialists rely on, including DuraFlex flexible liner systems for full relining and Olympia Chimney components for factory-built fireplaces and shared chases. We also work with HeatShield ceramic resurfacing for cost-effective liner repair without a full reline, plus Famco components where a manufacturer-specific part is required. We don’t stock parts, but the right component is what we order and fit for the job. If your prefab fireplace needs a specific liner, we source it for that make and model rather than patching with generic masonry materials. That’s the difference between a repair that holds and one that fails its next inspection.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Union City Homes
- Cracked crowns on shared chases. Water wicks sideways into a neighbor’s flue and rusts the damper, so the repair often serves more than one unit. We trace the leak across the shared masonry before quoting.
- Flashing pulled loose by pine straw and storm debris. Union City’s dense pine and hardwood canopy loads low-pitch townhome roofs with debris every season, and the resulting leak can mimic a liner failure. We check the roof line first.
- Prefab fireplaces patched with generic masonry. A manufacturer-specific flue liner patched with the wrong materials spalls and fails a Level 2 inspection. We fit the correct component for the make and model.
- Animal nests and storm debris in flues. A lot of calls here start with “something’s living in my chimney,” and it’s usually squirrels or birds in the cap. Clearing it and checking for damage is part of the sweep.
Pricing for Chimney Repair in Union City, GA
Chimney repair in Union City is priced per job from a written estimate, and the estimate is free. Most masonry and crown work here falls in the $350-$1,200 range depending on the sub-service and how much of the assembly has failed. Flashing repair typically runs $250-$550. A full reline with a DuraFlex stainless system runs higher, and we only recommend it when camera evidence shows the existing liner is truly failing. Repointing and tuckpointing of loose mortar joints usually runs $15-$40 per linear foot. Nothing gets recommended without photo or camera evidence you can review yourself, and we’ll tell you plainly when work can safely wait. Call (888) 268-0915 for your free estimate.
We Also Serve Cities Near Union City
We work across the south metro, and homeowners in Fairburn, South Fulton, College Park, and Riverdale call us for the same shared-chase and prefab fireplace problems we see in Union City. If you’re just outside the city limits, we can still get you a free estimate on a chimney repair.
Serving Union City, GA – Our Local Coverage Area
We serve Union City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Union City
Yes, it can, which is why a shared chase has to be treated as one structure rather than two. A crown repair or flashing fix that stops water at your unit also protects the adjacent flue from the same leak path, and we inspect both sides so we’re not sealing a crack while water finds a new route. Call (888) 268-0915 for an exact quote, and estimates are free.
Factory-built fireplaces use manufacturer-specific liners and clearances, so generic masonry materials can spall and fail a Level 2 inspection. The fix is a component made for that make and model, which is why we carry DuraFlex and Olympia Chimney parts rather than one-size-fits-all patches. Call (888) 268-0915 to book an inspection.
A blocked cap or nest usually shows up as poor draft, smoke rolling back into the room, or scratching and flapping sounds from the flue. Dense pine and hardwood canopy around Union City’s subdivisions loads caps with pine straw and leaves, and birds and squirrels nest in flues, so the fix is clearing the obstruction and checking the cap and crown for damage. Call (888) 268-0915 and we’ll take a look.
First-degree creosote is a light soot you can sweep away; third-degree is a hardened, glazed layer that needs chemical treatment or, in severe cases, a liner replacement because it’s a fire risk. Intermittent use in Union City’s shoulder seasons lets creosote build between burns, so a sweep and inspection catch it before it hardens. Call (888) 268-0915 for a free estimate.
In most cases it’s a crown repair, not a rebuild, as long as the masonry below the crown is still sound. We resurface hairline cracks or pour a new crown; a rebuild only comes up when the brick course itself is failing. Camera and photo evidence will show you which one you’re looking at. Call (888) 268-0915 to book it.
If your Union City chimney is leaking, drafting poorly, or letting a neighbor’s smoke in, don’t wait on it. Call (888) 268-0915 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. One company, from diagnosis through repair.
Written by the team at Valor Chimney Cleaning.