Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in South Fulton?
Chimney liner and rebuild work in South Fulton typically runs $2,200-$4,800 for a full stainless-steel reline and $6,500-$18,000 for a masonry chimney rebuild, depending on height, flue size, and how much of the structure has to come down. The most common jobs land closer to the low end: a HeatShield liner restoration or a single-flue DuraFlex reline usually settles between $2,200 and $3,800. If your chimney has pulled away from the house or lost its crown and flashing, a partial rebuild starts around $6,500 and climbs with height and access.
We’re Valor Chimney Cleaning, and we diagnose liner and rebuild problems before we price them. Every job here starts with an inspection, not a guess from the driveway.
Key Takeaways
- Full stainless reline: $2,200-$4,800, most jobs near the middle.
- HeatShield ceramic restoration: $1,100-$2,400, a cost-saving option when the flue is still structurally sound.
- Masonry rebuild: $6,500-$18,000, driven largely by how many courses come down.
- The written estimate sets the final price. Every number on this page is typical for the South Fulton market in 2026.
- Inspection, cleaning, and repair come from one company, so nobody hands your chimney off mid-job.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the individual line items break out for a South Fulton home in 2026. Each range assumes a single-flue wood-burning chimney; multi-flue or wood-stove work is priced per flue.
| Job | Typical cost | What it covers |
|---|---|---|
| Chimney inspection (Level 2) | $150-$350 | Video scan of the flue, assessment of masonry, cap, and crown |
| HeatShield ceramic liner restoration | $1,100-$2,400 | Resurfacing a sound flue instead of full relining |
| Partial liner repair (isolated crack or joint) | $350-$900 | Spot repairs where the damage is contained |
| Full DuraFlex stainless-steel reline | $2,200-$4,800 | New UL-listed flexible liner, insulation, top plate, cap |
| Reline on a tall or off-set flue | $3,800-$6,200 | Extra height, a jog in the flue, or a tight chase |
| Wood-stove flue reline | $2,400-$5,000 | Liner sized to the appliance, often with a new connector |
| Crown rebuild | $700-$1,800 | New poured or formed crown with proper overhang |
| Partial masonry rebuild (upper courses) | $6,500-$11,000 | Top-down rebuild of the section above the roofline |
| Full chimney rebuild | $12,000-$18,000 | Down to the smoke chamber, new flue tiles and liner |
| Chimney chase cover (metal) | $600-$1,400 | Replacement cover for prefab or chase-style chimneys |
What drives the price up or down is mostly how far the damage runs. A flue with a hairline crack and sound masonry can take HeatShield and stay well under $2,500. A chimney whose crown has failed for years, letting water wick into the brick, usually needs a partial rebuild before any liner can go in, because a new liner inside crumbling masonry fixes nothing. Height matters too: a two-story chimney on the gable end of a South Fulton house needs scaffolding and more time than a single-story flue at the ridge.
We install and work with professional-grade products – DuraFlex for full relining, HeatShield for ceramic restoration, and Gelco, Olympia Chimney, Famco, and Copperfield for the surrounding components. That’s the same material quality chimney specialists rely on, not the big-box version.
What Affects Chimney Liner & Rebuild Pricing in South Fulton
South Fulton is a big, varied stretch of metro Atlanta, and the same chimney can price very differently from one neighborhood to the next. These are the factors we weigh when we build an estimate.
- How much masonry comes down. On a partial rebuild, you’re paying by the course of brick removed and replaced. A chimney that has failed above the roof flashings only costs a fraction of one that’s crumbling down into the smoke chamber.
- Flue configuration. A straight vertical flue is the easiest reline there is. A flue with an offset, a tight clay tile bore, or a fireplace that original builders tucked into a chase adds labor and sometimes requires a smaller-diameter liner to get it down.
- Chimney height and roof pitch. A tall chimney on a steep roof needs staging, which adds cost. Lower, easy-to-reach chimneys in single-story neighborhoods come in cheaper.
- Red clay soil and summer storms. South Fulton sits on heavy Georgia red clay, and when a chimney footing shifts, the stack can lean or crack at the base, pushing a simple reline into rebuild territory. Summer thunderstorms and wind-driven rain also work on caps and crowns, so storm damage found during an inspection affects the scope.
- Home age and era of construction. Many South Fulton homes date from the 1990s-2000s building boom, and their original clay tile liners are now at the point of cracking as mortar joints fail. Homes with mid-century or earlier masonry often need the most work.
- Appliance type. A wood stove or insert needs a correctly sized, insulated liner that a masonry fireplace doesn’t. Getting the size wrong is both a performance problem and a safety problem.
- Hidden damage found during inspection. The honest estimate is the one after the video scan. A chimney can look fine from the ground and have a rusted damper, a cracked crown, and a separated flue tile all at once.
Safety comes before price on liner and rebuild work
A cracked or missing flue liner is a fire and carbon monoxide hazard, not a cosmetic defect. Combustion gases and creosote reach the wood framing and insulation around your chimney when the liner fails. That’s why we lead every job with an inspection that follows NFPA 211 standards and surface what’s actually there. We won’t reline a flue that needs rebuilding or rebuild a chimney that only needs resurfacing. If a problem is dangerous, we’ll tell you plainly, and if it’s minor, we’ll tell you that too.
How to Save on Chimney Liner & Rebuild in South Fulton
There’s real money in getting the scope right, and almost all of it comes from diagnosing early.
- Act on a small crack before it becomes a flue. A $350-$900 spot repair now is a fraction of a $3,000 reline later. Water is what kills liners and crowns, so catching a failing crown early is one of the highest-return repairs on a chimney.
- Ask whether HeatShield will work before you assume a full reline. If the flue is structurally sound and only the surface has broken down, ceramic restoration can save you a significant chunk compared to a full DuraFlex install.
- Repair the crown and cap together. Rebuilding the crown without addressing a missing or damaged cap lets water straight back in, and you’ll pay twice. Do both in one visit.
- Get it inspected before chimney season crowds the schedule. Off-season inspections give you more room to plan a rebuild around the scope you actually need rather than reacting to a problem.
- Get a written, itemized estimate. Ours is free. We break the job down line by line so you can see what a rebuild buys versus a reline.
Free estimates are a big part of how we keep this fair. Call (888) 268-0915 and we’ll set one up. Our technicians have up to 9 years of experience and approach each chimney diagnostically, so you’re not committing to a scope you don’t need.
Repair or replace: which one makes sense for your South Fulton chimney?
The short answer: if the structural masonry is sound and only the liner surface is failing, resurfacing or a partial repair usually wins on cost. If the brick is spalling, the crown is gone, or the stack is leaning, a rebuild is the honest call, because a liner can’t hold up a failing structure. We tell you which one you’re looking at and why, and we price both options when both are viable.
Chimney Rebuild Cost in South Fulton: What You’re Paying For
A rebuild isn’t just new brick. It’s removing the failed stack, rebuilding it with proper flue tiles, forming a crown with the right overhang so water leaves the chimney, and reinstalling the cap and flashings. The photos you see of a “rebuilt” chimney that fails again in a few years usually trace back to a flat crown or missing flashing. We rebuild the parts that weather can’t see, because that’s the work that keeps your house dry.
For homes in South Fulton, a rebuild on a two-story chimney also means working at height. That’s part of the cost, and it’s part of why we don’t quote a rebuild over the phone without looking at the roof pitch and access. A written estimate after the inspection is the number that matters.
What about metal chase covers and prefab chimneys?
South Fulton has plenty of homes with prefab or chase-style chimneys, and those work differently from masonry. A rusted chase cover gets replaced rather than rebuilt, and the liner runs in a rigid or flexible stainless system rather than a ceramic one. Those jobs typically land between $600 and $1,400 for the cover and $2,200 to $4,800 for a full reline. We’ll tell you which type you have in the first minute of the inspection, because that changes the whole estimate.
Chimney Liner & Rebuild FAQs
How much does chimney relining cost in South Fulton?
Full stainless-steel relining in South Fulton typically costs $2,200-$4,800 in 2026. A HeatShield ceramic restoration runs $1,100-$2,400 when the flue is still sound, and spot repairs land at $350-$900. The written estimate after inspection sets the final price. Call (888) 268-0915 for an exact quote – estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repairing the liner is almost always cheaper than relining when the flue is structurally sound – a HeatShield restoration or spot repair runs $1,100-$2,400 versus $2,200-$4,800 for a full reline. The catch is that a liner repair only holds if the masonry around it is intact. Call (888) 268-0915 and we’ll tell you which one your chimney actually needs – estimates are free.
How much does a chimney rebuild cost in South Fulton, GA?
A chimney rebuild in South Fulton runs $6,500-$11,000 for a partial rebuild of the upper courses and $12,000-$18,000 for a full rebuild down to the smoke chamber. The number is driven mainly by how much masonry has to come down. Call (888) 268-0915 for a written estimate – estimates are free.
How much does chimney inspection cost, and do I need one before a reline?
A Level 2 inspection typically costs $150-$350, and yes, you need one before any reline or rebuild. A video scan is how we find the cracks, separations, and crown damage that determine whether you need a $1,100 restoration or a $4,800 reline. Call (888) 268-0915 to schedule one – estimates are free.
Can you come today?
We offer same-day service when the schedule allows. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (888) 268-0915 and we’ll get you on the schedule.
Get a Written Estimate on Your Chimney
Liner and rebuild work is worth pricing once, properly, after someone has actually looked at the chimney. We do sweeping, inspection, and repair under one roof, so there’s no coordinating a second contractor when the estimate turns up something the ground-level view missed. Call (888) 268-0915 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We install professional-grade DuraFlex and HeatShield systems, and we do the right thing on the parts you can’t see.
Pricing reflects the South Fulton market as of 2026. Valor Chimney Cleaning offers free estimates – call (888) 268-0915.
Written by the team at Valor Chimney Cleaning.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Simone Bryant"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Carrie Brooks"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Neil Reddy