Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across East Point
If your fireplace smells like old smoke, the bricks around the crown are flaking, or you feel cold air moving through the hearth on a still day, you’re likely looking at chimney repair rather than just another cleaning. We handle chimney repair across East Point, from the bungalows near Colonial Hills to the small ranches closer to the airport, and we work out of what the camera and the masonry actually show us. East Point has a lot of homes with chimneys that were never touched during a renovation, and that’s usually where the real work is. Call (888) 268-0915 to get an estimate going. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why East Point Homeowners Call Valor Chimney Cleaning for Chimney Repair
Our technicians have up to 9 years of experience, and that time has been spent almost entirely on the kind of work older East Point chimneys need: diagnosing cracked flue tiles, restoring mortar joints, replacing rusted dampers, and relining stacks that were never built for the appliance now venting into them. We bring one company to the whole job, so sweeping, inspection, and repair don’t get passed between three different contractors. That’s a single point of accountability from the first look to the finished work.
The other reason East Point homeowners keep calling is that we don’t guess. Every job starts with a camera inspection, and the findings come to you as photos you can look at yourself. If a liner is sound, we say so. If a crown is going but can wait a season, we say that too. Valor means doing the right thing on every job, even the parts you can’t see, and even when the honest answer is that you don’t need the expensive repair yet. We work with professional-grade materials from brands like HeatShield, DuraFlex, Olympia Chimney, and Copperfield – the same products chimney specialists rely on, not the cheapest thing on the shelf.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Liner Installation in East Point
Chimney Liner Installation in East Point is usually the answer when a camera run up the flue shows cracked or missing terracotta tiles, and on this city’s older brick bungalows that’s the most common thing we find. A home here is often venting a wood-burning insert or a gas appliance into a stack built in the 1950s for open fires, and that mismatch is where carbon monoxide risk starts. A new stainless liner sized to the appliance closes that gap. A typical chimney liner installation in East Point runs $2,400-$4,800, and the written estimate sets the final price. We work with DuraFlex flexible liner systems for full relining, and HeatShield ceramic resurfacing when the existing liner can be restored instead of replaced.
When relining is the right call
Relining makes sense when the flue has gaps, offsets, or tiles that have cracked from decades of settling. A gap in the liner lets creosote and moisture reach the surrounding masonry, which is where hidden damage begins. If the camera shows breaks you can see, a liner is the fix that actually resolves it. If it doesn’t, we won’t recommend one.
Restoration before replacement
Not every worn flue needs a full liner. HeatShield resurfacing rebuilds the interior of a damaged flue from the inside, which is often the more cost-effective path on a chimney that’s otherwise sound. We use it where the joint structure supports it and save full relining for the cases that need it.
Chimney Flashing Repair in East Point
Chimney Flashing Repair in East Point matters more than it does in newer suburbs, because so many of these chimneys sit on low-slope roofs where a failed flashing seal sends water straight into the attic. Our humid summers and winter freeze-thaw cycles work the metal and the mastic loose over time, and once water gets behind the flashing it rots the roof deck and spalls the chimney brick above it. A typical chimney flashing repair in East Point runs $350-$850, and a full rebuild with new flashing runs higher depending on the masonry involved. The written estimate sets the final price. We reseal and rebuild with materials rated for the roof, not a bead of caulk around the base.
What a flashing failure looks like
You may spot it as a brown stain on the ceiling near the chimney, damp brick just below the roofline, or a chimney that separates from the roof deck when the house shifts. A camera and a close look at the roof usually settle whether the flashing is the source or something above it. That distinction decides the repair.
Low-slope roofs and tight lots
The older in-town neighborhoods sit on narrow lots with low-pitch roofs, which makes ladder access tricky and forces a careful setup rather than a quick lean. That’s one reason we inspect before we quote. It also means flashing work here gets done right the first time, since getting back up there isn’t a favor we want to ask of a roof twice.
Trusted Brands We Service in East Point
We install and work with professional-grade products from six recognized chimney industry brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. We don’t claim to stock every part on a shelf in East Point, but we source the right product for the job quickly, so a relining or damper replacement doesn’t stretch across weeks of waiting on a big-box order. The brands are chosen for durability and code compliance, not for the lowest price. If you’ve got a specific cap, damper, or liner already in mind, we’ll work with it where it fits the chimney.

Common Chimney Repair Problems We See in East Point Homes
These are the failures that repeat across East Point’s older housing stock, and they’re the reason a simple sweep often isn’t the whole answer.
- Cracked terracotta flue tiles. Decades of settling and minor seismic tremors have cracked the original clay liners in many 1940s-60s East Point homes, leaving gaps you can’t see without a camera. Creosote and moisture work into those gaps and start breaking down the chimney structure.
- Rusted-open or missing cast-iron dampers. The original dampers in these fireplaces corrode in the humid air, and many are stuck open or gone entirely. That lets conditioned air escape up the flue year-round and causes the constant draft homeowners often blame on a dirty chimney.
- Deteriorated mortar crowns and flashing. Humid summers and winter freeze-thaw cycles crack the crown and lift the flashing seal on low-slope roofs. Water gets in, and the brick above it starts to spall and flake.
- Appliances vented into stacks never built for them. Wood stoves and heating appliances added during a renovation often vent into an original open-fire flue sized for something else. That mismatch is a carbon monoxide concern and usually needs a properly sized liner.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in East Point, GA
Pricing is per job, and the written estimate sets the final price – the ranges below are typical for East Point’s market, not a promise. A cast-iron damper replacement or flashing repair starts around $350-$850. HeatShield liner resurfacing or a partial flue repair runs $900-$1,800. A full stainless liner installation with DuraFlex runs $2,400-$4,800. Mortar repointing and spalling brick repair land in the $500-$1,500 range depending on how much masonry is involved. A chimney rebuild after serious crown or brick failure runs $4,000-$9,000 or more. Estimates are free. Nothing is recommended without camera evidence you can see for yourself, and if a repair can safely wait a season, we’ll tell you. Call (888) 268-0915 for an exact quote.
We Also Serve Cities Near East Point
We work across the neighborhoods of East Point and out into the surrounding communities, including College Park, South Fulton, Riverdale, and Union City. If you’re just outside the city line, give us the address and we’ll confirm coverage before booking. The same inspection-first approach applies to every one of those calls.
Serving East Point, GA – Our Local Coverage Area
We serve East Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in East Point
You need an inspection before anyone can answer that, and on a 1950s East Point bungalow the odds tilt toward repair rather than cleaning alone. A camera inspection will show whether the terracotta liner is cracked, the crown is deteriorated, or the damper has rusted open. Once we have photos, we can tell you plainly whether a cleaning is all you need or a repair is warranted. Call (888) 268-0915 for a free estimate.
A chimney damper is likely rusted open or missing if you feel a steady draft from the fireplace even when it’s closed, or if you get a smoke smell in the room without a fire burning. In East Point’s humid air the original cast-iron dampers corrode in exactly that way, and it’s a common cause of energy loss here. We confirm it during inspection and can replace the damper. Call (888) 268-0915 for a free estimate.
The best liner for an East Point bungalow depends on the condition of the existing flue, and the camera tells us which route fits. A sound flue with surface damage often takes HeatShield resurfacing; a flue with breaks or offsets takes a DuraFlex stainless flexible liner sized to the appliance. Both are professional-grade and code-compliant. We don’t recommend either without showing you the evidence first. Call (888) 268-0915 for a free estimate.
Chimney crowns crack and brick spalls because the humid summers and freeze-thaw cycles here work moisture into the mortar, and the freeze pushes it apart. East Point’s older masonry is especially vulnerable after decades without a waterproofing layer. Repointing and crown repair address the surface, and waterproofing helps slow the cycle. Call (888) 268-0915 for a free estimate.
Yes, chimney flashing on a low-slope roof in East Point is routine work for us, and it’s one of the most important repairs on these homes. We tear out the failed seal, rebuild the flashing so it sheds water away from the masonry, and check the deck below for rot. The low pitch and tight lots make setup more careful, not impossible. Call (888) 268-0915 for a free estimate.
Get Your East Point Chimney Checked Before the Next Burn Season
Chimney problems in East Point’s older homes tend to stay quiet until the first cold night, when a draft, a smoke smell, or a flue that won’t draw makes them obvious. A camera inspection early is the cheapest way to know what you’re dealing with, and it keeps you from paying for work you don’t need. We handle sweeping, inspection, and repair under one company, with a written estimate before any job starts. Call (888) 268-0915 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Valor Chimney Cleaning.