Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Union City, GA
Chimney inspection in Union City, GA starts with one question: what’s actually inside the flue? Most of the homes here were built in the 1990s and 2000s with factory-built fireplaces that see light, occasional use, and that changes what a chimney company should be looking for. We’re a full chimney company handling inspection, sweeping, and repair, and we approach every Union City job diagnostically, not cosmetically. Our technicians have up to 9 years of experience, and we work with professional-grade materials the trade relies on. Call (888) 268-0915 to book an inspection. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Union City Homes Are Different
Union City sits just south of Atlanta off I-85, in a heavily wooded, post-1990s suburban stretch where the housing stock is dominated by subdivision homes and townhomes. Many of those were built with factory-built fireplaces and a handful of masonry chimneys, with a smaller stock of older ranch homes near the city core. Factory-built units are not masonry chimneys, and they don’t take a traditional masonry sweep. They need manufacturer-specific inspection and cleaning, and the components that fail in them fail differently.
The bigger factor is how little these fireplaces actually get used. North Georgia’s warm, humid climate and long shoulder seasons mean fires happen intermittently, and creosote and moisture build up between burns instead of getting burned off through steady winter use. Add a dense pine and hardwood canopy and you get caps clogged with pine straw, leaves, and storm debris, plus squirrels and birds nesting in flues. A large share of calls here aren’t “time for a sweep” but “something’s living in my chimney.” Homes across 30291 deal with the same conditions.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Union City Services
Union City homeowners call us most often about two jobs, and both start with finding out what’s actually going on in the flue before anyone recommends work.
Chimney Sweep in Union City
In Union City, a sweep is rarely about a thick winter’s worth of creosote. It’s pine straw and leaf debris packed against the cap, animal nesting pulled out of the flue, and the light, glazed creosote that builds when a fireplace gets used a few times a month through a long shoulder season. Factory-built units need the right tools and the manufacturer’s method, not a masonry brush run down a prefab pipe. Every cleaning includes a visual assessment of flue condition, so you know what else the chimney is telling us. Read more about Chimney Sweep in Union City.

Chimney Repair in Union City
Repair work around Union City tends to center on the parts that fail on 1990s and 2000s subdivision homes: cracked crowns, damaged caps, loose flashing where a storm pushed water in, and flue components that have aged out of spec. Because these homes sit under heavy tree cover, storm debris and animal intrusion cause more damage here than heavy burning does. We repair what we find with the right product for the job, and we won’t recommend liner work without camera evidence you can see. Details on Chimney Repair in Union City.

Chimney Inspection in Union City
Chimney inspection in Union City matters more than the fireplace use would suggest. Homes built between the 1990s and 2000s with factory-built units and light, intermittent burning hide problems well: a flue that’s never hot enough to burn off creosote, a cap packed with pine straw, a bird nest against a pipe. An inspection is how you find out what your chimney is doing before it becomes a fire or carbon monoxide problem.
Fireplace Inspection
Signs you need it
You should book a fireplace inspection if your fireplace smells smoky when it isn’t in use, if the fire draws poorly, or if you’ve never had the unit looked at since you moved into a Union City subdivision home.
What it costs in Union City
A fireplace inspection typically runs $99 to $250 in Union City, with the written estimate setting the final price once we see the unit.
How we do it
We check the firebox, damper, firebrick, and the visible flue from the firebox up, note the appliance type and manufacturer where we can identify it, and record what we find for you in plain terms.
Chimney Flue Inspection
Signs you need it
A flue inspection is due when you notice creosote buildup, a cracked or missing cap, water stains near the chimney, or evidence that birds or squirrels have gotten into the flue.
What it costs in Union City
Flue inspection typically costs $99 to $250 in Union City, and camera work on a difficult flue falls inside the same written estimate.
How we do it
We run a camera down the flue to look for gaps, cracks, missing mortar joints, and obstructions, then show you the footage and explain what each finding means before any repair is discussed.
What Chimney Inspection Costs in Union City
| Item | Typical range in Union City |
|---|---|
| Standard chimney inspection | $99 – $250 |
| Level 2 chimney inspection with camera | $150 – $400 |
| Chimney inspection bundled with sweeping | $99 – $250 |
Do I need a Level 2 chimney inspection in Union City?
You need a Level 2 inspection in Union City after a chimney fire, a storm event, a change of appliance, or when you’re buying a home. It adds camera access to parts a basic visual check can’t reach. Call (888) 268-0915 for an exact quote. Estimates are free.
Can an inspection tell me whether my prefab fireplace is safe to use?
It can tell you what the visible and camera-accessible components look like, including cracks, gaps, and aging parts, which is what drives a safety call on a factory-built unit. It can’t verify what the manufacturer specified without documentation. Call (888) 268-0915 to book the assessment.
Brands We Service in Union City
We install and work with professional-grade chimney products from a curated lineup, including DuraFlex flexible liner systems, Olympia Chimney components, and Famco caps and accessories. We don’t claim stocked parts in Union City; material is sourced for the job, and turnaround depends on the product and the repair scope. You can see the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Union City, GA
| Service | Typical range in Union City |
|---|---|
| Standard chimney inspection | $99 – $250 |
| Level 2 chimney inspection with camera | $150 – $400 |
| Chimney sweep | $150 – $350 |
| Chimney cap installation | $150 – $450 |
| Crown repair | $250 – $800 |
| Chimney flashing repair | $200 – $600 |
| Animal nest removal and cap screening | $200 – $500 |
| HeatShield liner resurfacing | $1,200 – $3,000 |
| DuraFlex stainless liner installation | $2,000 – $5,000 |
Two things push price up in Union City: tall two-story chimney runs on subdivision homes, and storm or animal damage that turns a simple repair into cap, screen, and flashing work at once. We give you an upfront price in writing before any work begins, and that written estimate is what you pay.
Neighborhoods We Serve in Union City
We take chimney calls across Union City, from the subdivision streets off the I-85 corridor to the older ranch homes nearer the city core. The tree canopy and the age of the housing stock matter more than the specific street, so the work looks similar across the city. Whether you’re in a townhome with a factory-built unit or a single-family home with a masonry chimney, we book the inspection the same way and show you what we find.
- Subdivision homes along the I-85 corridor
- Townhome communities near the city core
- Older ranch homes near downtown Union City
- Wooded lots throughout 30291
Because we’re booking inspections and sweeps, not emergency runs, a call in the morning usually gets you into the next available opening Sunday through Friday.
Service Area – Cities Near Union City
Union City sits in the middle of a stretch of South Fulton and Clayton County communities we regularly serve. If you’re just outside the city line, we cover the surrounding area too, including Fairburn, GA, South Fulton, GA, College Park, GA, and Riverdale, GA. The same wooded-canopy conditions and 1990s-to-2000s housing stock shape the chimney work across all of them. Book a visit and we’ll confirm the address and what to expect.
Serving Union City, GA – Our Local Coverage Area
We serve Union City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Union City
We book into the next available opening, Sunday through Friday, 7am to 7pm. Call (888) 268-0915 and we’ll find the first slot that fits your schedule. We answer 24/7, and a call outside dispatch hours is booked into the next opening.
Most chimney repairs don’t require a permit, but some jurisdictions do require one for structural or liner work, and some HOAs have rules about exterior changes like cap style or chase appearance. Check with the city of Union City’s building department and your HOA before scheduling a repair.
Yes. We serve Union City and the surrounding South Fulton and Clayton County communities. If you’re just outside the city line, call (888) 268-0915 and we’ll confirm coverage before booking. Estimates are free.
Chimney work in Union City comes down to what’s actually in the flue, not what a generic checklist says. Whether you’re dealing with a clogged cap, a bird nest, or a factory-built fireplace that’s never been properly inspected, we’ll look first and tell you plainly what needs doing and what can wait. Call (888) 268-0915 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Union City Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Simone Bryant"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Carrie Brooks"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Neil Reddy